Creating & Programming Robots

User Tools

Site Tools

Trace: • socket-com-with-robot
vrep:socket-com-with-robot

Back to V-REP Main Page

The socket communication allows for an external program to control the robot inside V-REP. The external program is a Python script. We will use for the socket a server/client communication. The server is written in Lua inside a threaded script in V-REP. The client is written in Python, It will :

  • connect to the server
  • send commands to the robot
  • read data from the robot (sensors, status, …)
  • disconnect from the server

On the server side of the socket, we use a threaded script in Lua as we want to listen to the client's commands synchronously with the V-REP simulation loop.

We will use a simple 3 wheels robot and we load it in V-REP. You can rename it myLittleBot.ttt.

The first thing to do is to add a threaded script to a object. We can choose to add it to the MainBody object but it can be any other object in the scene :

Right-Clic on the small icon on the left of MainBody and select Add→Associated child script→Threaded. After this a blue icon showing a text file should appear on the right of MainBody :

To edit, double-clic on this icon. You can edit directely in the V-REP script window. However, if you prefer using you preferred editor, you can remove all the Lua text code in the script and just type one line : 

require ("simple_control_bot")

Then you will have to create a file called simple_robot_control.lua in the directory where your scene file (here myLittleBot.ttt) is stored.

The Lua code looks like this : 

-- load pack library
-- must have been added previoulsy in V-REP folder
-- if not done yet, see tutorial ...
require ("pack") 
bpack=string.pack
bunpack=string.unpack
 
-- define socket
portNb = 33211
serverOn = false
connexionTimeout = 0.001 -- set 1 ms time out
socket=require("socket")
srv = nil
clt1 = nil
nCharMessage = 10
 
function sysCall_threadmain()
   -- initialization
   -- get left and right motors handles
   leftMotor = sim.getObjectHandle("MotorLeft")
   rightMotor = sim.getObjectHandle("MotorRight")
   -- control loop
   while true do
      -- get simulation time at beginning of the loop
      simTime = sim.getSimulationTime()
      -- if server is not running, start it
      if not serverOn then
	 printToConsole ("not connected")
	 srv = assert(socket.bind('127.0.0.1',portNb))
	 if (srv==nil) then
	    printToConsole ("bad connect")
	 else
	    printToConsole ("get socket")
	    ip, port = srv:getsockname()
	    printToConsole ("server ok at "..ip.." on port "..port)
	    serverOn = true
	    printToConsole ("connexion granted !!! ")
	 end
      end
      -- if server is running, accept command and send back status
      if serverOn then
	 -- to prevent lock on accept, a timeout is set
	 srv:settimeout(connexionTimeout)
	 clt1 = srv:accept()
	 if clt1 ~= nil then
	    -- to prevent lock, a timeout is set
	    --clt1:settimeout(connexionTimeout)
	    -- get the data (command) from the client
	    dataIn = clt1:receive(nCharMessage)
	    if dataIn ~= nil then
	       -- unpack the received data with following format :
	       --   char : first synchro char 'A' 
	       --   char : second synchro char 'Z' 
	       --   float : speed left
	       --   float : speed right
	       nrd1,ch1,ch2,speedLeft,speedRight = bunpack(dataIn,"AAff")
	       if ch1 ~= 'A' or ch2 ~= 'Z' then
		  print ("bad data from py client ...")
	       else
		  -- apply the command
		  sim.setJointTargetVelocity(leftMotor,speedLeft)
		  sim.setJointTargetVelocity(rightMotor,speedRight)
	       end
	       -- prepare the status to send back  the client :
	       -- simulation time and wheel angular position (radians)
	       wheelAngleLeft =  sim.getJointPosition(leftMotor)
	       wheelAngleRight = sim.getJointPosition(rightMotor)
	       ch1 = 'A' -- sync code 1
	       ch2 = 'Z' -- sync code 2
	       -- pack the status data
	       dataPacked = bpack("AAfff",ch1,ch2,simTime,wheelAngleLeft,wheelAngleRight)
	       -- Send the status data back to the client:
	       clt1:send(dataPacked)	 
	    else
	       printToConsole ("no data")
	    end
	    clt1:close()
	 end
      end
   end
end
 
function sysCall_cleanup()
    -- Put some clean-up code here
end

The socket transfers binary data, so we need to pack the data before sending them and unpack them at the reception. For Lua we use the lpack library. You can either download the code and recompile the pack.so shared library or get it already compiled here if you work on x86_64 linux computer. The file pack.so should be added in the main V-REP directory.

Todo : provide a .dll for windows

The socket is between processes on the same computer so the IP address is localhost or 127.0.0.1. The communication port is set to 33211. The port number is arbitrary, if this port is already used, we will get an error message. To get a list of used port, you can use lsof. Here we print only the ports used by V-REP: 

sudo lsof -i -P -n | grep LISTEN | grep vrep
[sudo] password for user: 
vrep      13871          newubu   29u  IPv4 17679486      0t0  TCP *:19997 (LISTEN)
vrep      13871          newubu   38u  IPv4 20187130      0t0  TCP 127.0.0.1:33211 (LISTEN)

The Lua server expects to receive a command from the Python client with 4 values :

  • character A (1 byte)
  • character Z (1 byte)
  • float speed_left (4 bytes)
  • float speed_right (4 bytes)

It has first to unpack these data with bunpack() function. Then it checks if the two first values are 'A' and 'Z'. This is just to ensures that the connection is synchronized properly. In principle, TCP/IP sockets already check if all is OK, so may no used it and transmit only the usefull values.

If the message received is OK (starting with 'A' and 'Z'), the Lua server applies the command to the left and right motors.

Finally it reads the status data. Here the status has 3 values : the simulation time and the angular position of the two wheels. The angular position of the wheels is very useful if we want to simulate odometers. The status message is made of five values :

  • character A (1 byte)
  • character Z (1 byte)
  • float simulation time (4 bytes)
  • float angular_position_wheel_left (4 bytes)
  • float angular_position_wheel_right (4 bytes)

The 5 values are packed with bpack() function and sent back to the python client.

The Python3 code of the client controls the robot by sending the motor speed for the two wheels. It can be executed via a terminal. For example to set the left motor speed to 0.5 and the right to -0.5, type: 

python3 simple_robot_control.py 0.5 -0.5
sockect time=6.8 ms, simTime=4.85 s, left angle=-0.0, right angle=0.0
sockect time=3.9 ms, simTime=4.95 s, left angle=2.4, right angle=-2.4
sockect time=6.7 ms, simTime=4.95 s, left angle=3.8, right angle=-3.8
sockect time=7.0 ms, simTime=5.05 s, left angle=5.2, right angle=-5.2
sockect time=0.4 ms, simTime=5.10 s, left angle=8.0, right angle=-8.0

The robot will turn in place to the right.

Do not forget to start the simulation in V-REP before executing the Python client code. Otherwise, the communication socket will not work : 

python3 simple_robot_control.py 0.5 -0.5
Cannot connect to server

The Python3 client code is as follows: 

import socket
import time
import struct
import signal
import sys
import math
 
code_sync_1 = 'A'
code_sync_2 = 'Z'
 
# set the speed of the two wheels
try:
    speed_left = float(sys.argv[1])
    speed_right = float(sys.argv[2])
except:
    speed_left = 0.0
    speed_right = 0.0
 
# set address and port for the socket communication
server_address_port = ('localhost', 33211)
 
# interrupt handler
def interrupt_handler(signal, frame):
    print ('You pressed CTRL-C, end of communication with V-REP robot')
    time.sleep(0.5)
    try:
        sock.close()
    except:
        print (sock,"socket already closed")
    sys.exit(0)
 
# trap hit of ctrl-C to stop the communication with V-REP
signal.signal(signal.SIGINT, interrupt_handler)
 
# client connects to server every 50 ms
loop_duration = 0.050
while True:
    # Create a TCP/IP socket
    t0 = time.time()
    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    try:
        sock.connect(server_address_port)
    except:
        print ("Cannot connect to server")
        break
 
    sock.settimeout(0.1) # set connection timeout
    # pack command
    strSend = struct.pack('<BBff',ord(code_sync_1),ord(code_sync_2),speed_left,speed_right)
    # send command to V-REP
    sock.sendall(strSend)
 
    # wait for status back from V-REP
    data = b''
    nch_rx = 14 # expect receiving 14 bytes from  V-REP 
    try:
        while len(data) < nch_rx:
            data += sock.recv(nch_rx)
    except:
        print ("socker error , duration is %f ms, try to reconnect !!!"%((time.time() - t0)*1000.0))
    # unpack the received data
    data_ok = False
    if len(data) == nch_rx:
        vrx = struct.unpack('<ccfff',data)
        if vrx[0] == b'A' and  vrx[1] == b'Z':
            data_ok = True
    else:
        pass
 
    sock.close()
    tsock = (time.time() - t0)*1000.0
 
    if data_ok:
        print ("sockect time=%.1f ms, simTime=%.2f s, left angle=%.1f, right angle=%.1f"%
               (tsock,vrx[2],vrx[3]*180.0/math.pi,vrx[4]*180.0/math.pi))
    else:
        print ("tsock",tsock,"ms, bad data !!")
 
    tsleep = loop_duration - (time.time()-t0)
    if tsleep>0:
        time.sleep (tsleep)

Go to top

vrep/socket-com-with-robot.txt · Last modified: 2023/03/31 12:14 by 127.0.0.1